Old aRO Forums

The 'Other' Section => AnesisRO Archive => Archive => General Questions => Topic started by: wish on December 26, 2007, 12:17:54 am

Title: hi can you help me please?
Post by: wish on December 26, 2007, 12:17:54 am

hmmm i download the full set up of anthemro then when i patch it it says error i put SS below and theres no DATA folder and no Screenshot folder what should i do?

(http://img201.imageshack.us/img201/6343/anthemroerrortd7.jpg) (http://imageshack.us)

Title: Re: hi can you help me please?
Post by: wish on December 26, 2007, 12:18:38 am

thats the error what should i do right now gm rebooting the server.. any one help me plox ;D ;D

Title: Re: hi can you help me please?
Post by: Denia on December 26, 2007, 12:19:54 am

For the screenshots folder, download this mini setup and reinstall it.

http://files.filefront.com/AnthemROMiniSetup20/;9059952;/fileinfo.html

Quote from: GM Denia on November 16, 2007, 01:49:00 pm

A fix I found via google, the one colored in purple seems to be what usually will do it for players ^^

-PLEASE make sure your system meets the minimum requirements for RO. (voodoo series cards sometimes don't work properly, same with Mobility Rage/Radeon cards.. they might have fixed this problem with the newer cards though.)

MINIMUM REQUIREMENTS:
OS: Windows 98se/me/2000/XP
CPU: Pentium - 500 or equivalent
(AMD CPU, Celeron)
RAM: 128MB
VGA: DirectX 3D Support
VGA: Card with 8 MB video memory
SOUND: DirectSound support
OTHER: DirectX 8.0

RECOMMENDED REQUIREMENTS:
OS: Windows 98se/me/2000/XP
CPU: Pentium - 700 or better
(AMD CPU, Celeron)
RAM: 256MB
VGA: DirectX 3D Support
VGA: Card with 32 MB video memory
SOUND: DirectSound equivalent /3D Surround Sound Support
OTHER: DirectX 8.0 or better.

Supported VGA Chipsets:
NVidia GeForce 2 MX or better
ATI RADEON or better
MATROX G400 or better

Compatible but may experience problems
NVidia Riva TNT or equivalent
Voodoo3 or equivalent
S3 Savage or equivlaent
ATI Rage128, Mobility rage/radeon or equivalents

KNOWN FIXES FOR CANNOT INIT D3D OR GRF FILE HAS PROBLEM

-Update your video driver and direct x.
-Make sure your video driver is listed in the ragnarok setup (to get to set up, go to the folder you have ro installed in and click the icon that says Setup). <= Kaypha mentioned this one.. if it's not there, install your video driver.
-Set to full screen mode.
-Lower your settings in the RO Setup (usually, this doesn't make much of a difference but I know of one case where it did).
-Be sure the resolution you're using in the RO setup is the same one you use on your computer.
-Check to see if you're using 'Direct3D HAL' in the RO Setup. If not, choose that one. If you are, choose the other.
-Make sure Remote desktop sharing isn't enabled (to do so, open up netmeeting, and under tools, go to Remote Desktop Sharing and go through the whole setup thing. After that completes, go back to tools and uncheck Remote desktop sharing to disable it). Remote Desktop has a nasty habit of sometimes not allowing other applications to use directdraw.

DRIVERS/DIRECTX

DirectX: http://www.microsoft.com/windows/directx/default.aspx
Intel Video Drivers - http://downloadfinder.intel.com/scripts-df/support
Nvidia Video Drivers - http://www.nvidia.com/content/drivers/drivers.asp
ATI Video Drivers - http://ati.com/support/driver.html

If none of this works, run the Directx diags and look for problems there. to run these diags, go Start => Run => type "dxdiag"

Once you get there, check out the Display tab. This will allow you to make sure directdraw and direct3d are working properly and enabled.

Title: Re: hi can you help me please?
Post by: shane3x on December 26, 2007, 12:20:46 am

Looking at the only sticky in this board too much to ask?

http://www.anthemro.com/forums/index.php/topic,81.0.html

Title: Re: hi can you help me please?
Post by: wish on December 26, 2007, 12:23:09 am

well i downloaded the one in the site  ;D so i think its different?

Title: Re: hi can you help me please?
Post by: shane3x on December 26, 2007, 12:25:58 am

Quote from: wish on December 26, 2007, 12:23:09 am

well i downloaded the one in the site  ;D so i think its different?

It will be the same thing in the end, just find the section that addresses your problem.

Title: Re: hi can you help me please?
Post by: wish on December 26, 2007, 12:37:39 am

Quote from: GM Denia on December 26, 2007, 12:19:54 am

For the screenshots folder, download this mini setup and reinstall it.

http://files.filefront.com/AnthemROMiniSetup20/;9059952;/fileinfo.html

Quote from: GM Denia on November 16, 2007, 01:49:00 pm

A fix I found via google, the one colored in purple seems to be what usually will do it for players ^^

-PLEASE make sure your system meets the minimum requirements for RO. (voodoo series cards sometimes don't work properly, same with Mobility Rage/Radeon cards.. they might have fixed this problem with the newer cards though.)

MINIMUM REQUIREMENTS:
OS: Windows 98se/me/2000/XP
CPU: Pentium - 500 or equivalent
(AMD CPU, Celeron)
RAM: 128MB
VGA: DirectX 3D Support
VGA: Card with 8 MB video memory
SOUND: DirectSound support
OTHER: DirectX 8.0

RECOMMENDED REQUIREMENTS:
OS: Windows 98se/me/2000/XP
CPU: Pentium - 700 or better
(AMD CPU, Celeron)
RAM: 256MB
VGA: DirectX 3D Support
VGA: Card with 32 MB video memory
SOUND: DirectSound equivalent /3D Surround Sound Support
OTHER: DirectX 8.0 or better.

Supported VGA Chipsets:
NVidia GeForce 2 MX or better
ATI RADEON or better
MATROX G400 or better

Compatible but may experience problems
NVidia Riva TNT or equivalent
Voodoo3 or equivalent
S3 Savage or equivlaent
ATI Rage128, Mobility rage/radeon or equivalents

KNOWN FIXES FOR CANNOT INIT D3D OR GRF FILE HAS PROBLEM

-Update your video driver and direct x.
-Make sure your video driver is listed in the ragnarok setup (to get to set up, go to the folder you have ro installed in and click the icon that says Setup). <= Kaypha mentioned this one.. if it's not there, install your video driver.
-Set to full screen mode.
-Lower your settings in the RO Setup (usually, this doesn't make much of a difference but I know of one case where it did).
-Be sure the resolution you're using in the RO setup is the same one you use on your computer.
-Check to see if you're using 'Direct3D HAL' in the RO Setup. If not, choose that one. If you are, choose the other.
-Make sure Remote desktop sharing isn't enabled (to do so, open up netmeeting, and under tools, go to Remote Desktop Sharing and go through the whole setup thing. After that completes, go back to tools and uncheck Remote desktop sharing to disable it). Remote Desktop has a nasty habit of sometimes not allowing other applications to use directdraw.

DRIVERS/DIRECTX

DirectX: http://www.microsoft.com/windows/directx/default.aspx
Intel Video Drivers - http://downloadfinder.intel.com/scripts-df/support
Nvidia Video Drivers - http://www.nvidia.com/content/drivers/drivers.asp
ATI Video Drivers - http://ati.com/support/driver.html

If none of this works, run the Directx diags and look for problems there. to run these diags, go Start => Run => type "dxdiag"

Once you get there, check out the Display tab. This will allow you to make sure directdraw and direct3d are working properly and enabled.

i couldnt see the nettool thing im using VISTA

Title: Re: hi can you help me please?
Post by: Denia on December 26, 2007, 12:40:28 am

C:\Program Files\Netmeeting

Should be in there, open the program, go to tools etc and follow those instructions.

Title: Re: hi can you help me please?
Post by: wish on December 26, 2007, 12:43:08 am

Quote from: GM Denia on December 26, 2007, 12:40:28 am

C:\Program Files\Netmeeting

Should be in there, open the program, go to tools etc and follow those instructions.

theres no netmeeting in my computer /sob

and i still dont have the Screenshot i mean i extract the small set up then yes to all then
i log in to Aro then make a SS butt still not there

Title: Re: hi can you help me please?
Post by: shane3x on December 26, 2007, 01:29:43 am

So you downloaded the anthem mini set up and you copied over the old anima files? That isn't really the best thing to do since doing that can have it's problems.

Title: Re: hi can you help me please?
Post by: Denia on December 26, 2007, 01:34:22 am

Next best thing I can give you is this wish, though I dont know if it'll help you:

http://iro.ragnarokonline.com/support/questioncontent.asp?noticeSeqNo=38&Page=1&Condition=all&KeyWord=d3d&mNum=0

Title: Re: hi can you help me please?
Post by: shane3x on December 26, 2007, 01:37:27 am

Quote from: shane3x on December 26, 2007, 12:20:46 am

Looking at the only sticky in this board too much to ask?

http://www.anthemro.com/forums/index.php/topic,81.0.html

Lol denia, have you seen this thread?

Title: Re: hi can you help me please?
Post by: Denia on December 26, 2007, 01:40:44 am

Shane are you trying to test my patience? I obviously saw it but he obviously isn't going to read through the whole thing else it would have been fixed by now. The netmeeting fix is a known fix for winxp users, however he doesn't have it posted there. By posting the exact reasons as to why he might have that problem, helps him more than giving him a link to a whole big old thing where he's going to say ... wut?

He also used the AnthemRO full installer, just an FYI.

Title: Re: hi can you help me please?
Post by: shane3x on December 26, 2007, 01:47:39 am

Quote from: GM Denia on December 26, 2007, 01:40:44 am

Shane are you trying to test my patience? I obviously saw it but he obviously isn't going to read through the whole thing else it would have been fixed by now. The netmeeting fix is a known fix for winxp users, however he doesn't have it posted there. By posting the exact reasons as to why he might have that problem, helps him more than giving him a link to a whole big old thing where he's going to say ... wut?

He also used the AnthemRO full installer, just an FYI.

Just checking /heh

Dont worry /no1

Title: Re: hi can you help me please?
Post by: wish on December 26, 2007, 02:02:08 pm

Quote from: GM Denia on December 26, 2007, 01:34:22 am

Next best thing I can give you is this wish, though I dont know if it'll help you:

http://iro.ragnarokonline.com/support/questioncontent.asp?noticeSeqNo=38&Page=1&Condition=all&KeyWord=d3d&mNum=0

well i think im not gonna play with no SS /sigh but in other server i can patch and i can save SS /sob hmm i used to have a SS from animaro but since i install the mini setup on my animaro programs the screenshot was gone and i cant even patch it it just patch then when i hit start its nothing happen.right now i use the .exe patch is not working and screenshot too.

Title: Re: hi can you help me please?
Post by: wish on December 28, 2007, 02:24:16 am

/sigh

Title: Re: hi can you help me please?
Post by: AceJay on December 28, 2007, 10:44:12 am

If you're using other servers inside your RO folder, that can cause problems too.

It would REALLY help you if you just read this and installed that way:

http://www.anthemro.com/forums/index.php/topic,81.0.html

Title: Re: hi can you help me please?
Post by: dalu on December 28, 2007, 10:50:36 am

Quote from: wish on December 26, 2007, 02:02:08 pm

Quote from: GM Denia on December 26, 2007, 01:34:22 am

Next best thing I can give you is this wish, though I dont know if it'll help you:

http://iro.ragnarokonline.com/support/questioncontent.asp?noticeSeqNo=38&Page=1&Condition=all&KeyWord=d3d&mNum=0

well i think im not gonna play with no SS /sigh but in other server i can patch and i can save SS /sob hmm i used to have a SS from animaro but since i install the mini setup on my animaro programs the screenshot was gone and i cant even patch it it just patch then when i hit start its nothing happen.right now i use the .exe patch is not working and screenshot too.

update sakray too and try fullscreen configure..............

Title: Re: hi can you help me please?
Post by: aarox on December 28, 2007, 10:59:37 am

Nice background ^^