Old aRO Forums

The 'Other' Section => AnesisRO Archive => Archive => General Questions => Topic started by: Daegon on October 04, 2008, 02:46:47 am

Title: Download Help
Post by: Daegon on October 04, 2008, 02:46:47 am

ok so i have the old "AnimaRo" [full set-up] disk and i installed it on my comp so i could play Anthem so everything is over and done so what do i do next?

Title: Re: Download Help
Post by: aaroncsn on October 04, 2008, 03:20:26 am

Patch Sakray.exe and AnthemPatch

Title: Re: Download Help
Post by: Daegon on October 04, 2008, 03:21:49 am

ok tell me if im doing this right...
Im patching sakray and it looks like this...
:(http://img.photobucket.com/albums/v476/veronron/RO.jpg)

and how do i patch anthem?

Title: Re: Download Help
Post by: aaroncsn on October 04, 2008, 03:32:59 am

the sakray patch is going fine. Try posting a picture of your ro folder for a further view of it.

Title: Re: Download Help
Post by: Daegon on October 04, 2008, 03:40:09 am

(http://img.photobucket.com/albums/v476/veronron/RO2.jpg)

Title: Re: Download Help
Post by: aaroncsn on October 04, 2008, 03:42:06 am

You see the AnimePatch.exe? Try patching that.

Title: Re: Download Help
Post by: Daegon on October 04, 2008, 03:43:41 am

ok...
it showed me the Anima Patyhcer than it showed me the Cannot init something

Title: Re: Download Help
Post by: aaroncsn on October 04, 2008, 03:56:18 am

oh wait. Your AnthemRO setup is still running. Just wait till it finish ^^

---

We do this step by step ^^

Edited by Lucifiel: Merged double post.

Title: Re: Download Help
Post by: Fidelis on October 04, 2008, 04:01:10 am

Download an up-to-date client to save yourself some trouble @_@

You CAN download the Mini Setup only, but it will take hours to patch your Sakray.
Mini Client: http://72.55.188.250/installer/Mini.msi . Install it to your C:\Program Files\Gravity\RO folder, and use AnthemPatch.exe (NOT AnimaPatch.exe) afterwards.
Full Client (I highly recommend you to use this one! Don't forget to patch your Anthem client after the installation): http://72.55.188.250/installer/Full.msi

Title: Re: Download Help
Post by: Daegon on October 04, 2008, 04:05:03 am

which one is quicker? =|

Title: Re: Download Help
Post by: Fidelis on October 04, 2008, 04:50:32 am

Actually, the Mini Client will be downloaded faster, since the file is not as big as the Full Client, but you need to patch your Sakray client afterwards, and if it starts somewhen in 2006, it will take hours to patch. Full Client is simply: Download, install, patch Anthem client, play!

I just saw your other post, you're already downloading a more up-to-date client via the All-in-One installer. That one should suffice, but don't forget to patch your Anthem client afterwards. Also, delete the folder with the old Anima client, it's simply too old. ._.

Title: Re: Download Help
Post by: Daegon on October 04, 2008, 05:16:06 am

Well i paused the All in one and just decided to download the Full one to avoid problems and stuff....
Thanks for all the replies and only 2 hours to go =]

---

Ok Download the full client....
and Ran the Anthem Patch

and then i got this
CANNOT INIT D3D OR GRF HAS A PROBLEM ERRORS:

Edited by Lucifiel: Merged double post.

Title: Re: Download Help
Post by: Lucifiel on October 04, 2008, 09:33:26 am

The following may help.

Quote from: GM Denia on November 16, 2007, 01:49:00 pm

KNOWN FIXES FOR CANNOT INIT D3D OR GRF FILE HAS PROBLEM

-Update your video driver and direct x.
-Make sure your video driver is listed in the ragnarok setup (to get to set up, go to the folder you have ro installed in and click the icon that says Setup). <= Kaypha mentioned this one.. if it's not there, install your video driver.
-Set to full screen mode.
-Lower your settings in the RO Setup (usually, this doesn't make much of a difference but I know of one case where it did).
-Be sure the resolution you're using in the RO setup is the same one you use on your computer.
-Check to see if you're using 'Direct3D HAL' in the RO Setup. If not, choose that one. If you are, choose the other.
-Make sure Remote desktop sharing isn't enabled (to do so, open up netmeeting, and under tools, go to Remote Desktop Sharing and go through the whole setup thing. After that completes, go back to tools and uncheck Remote desktop sharing to disable it). Remote Desktop has a nasty habit of sometimes not allowing other applications to use directdraw.

DRIVERS/DIRECTX

DirectX: http://www.microsoft.com/windows/directx/default.aspx
Intel Video Drivers - http://downloadfinder.intel.com/scripts-df/support
Nvidia Video Drivers - http://www.nvidia.com/content/drivers/drivers.asp
ATI Video Drivers - http://ati.com/support/driver.html

If none of this works, run the Directx diags and look for problems there. to run these diags, go Start => Run => type "dxdiag"

Once you get there, check out the Display tab. This will allow you to make sure directdraw and direct3d are working properly and enabled.