Old aRO Forums

The 'Other' Section => AnesisRO Archive => Archive => General Questions => Topic started by: novice on September 04, 2008, 09:36:19 pm

Title: rollback question
Post by: novice on September 04, 2008, 09:36:19 pm

is it possible to rollback my high priest to a different class? (ex. sinx)

Title: Re: rollback question
Post by: light aura on September 04, 2008, 09:38:48 pm

Yes, but you would have to roll back to a high novice.  You'd keep your base levels, but have to regain your job levels.

EDIT:
To clarify something else, if you were to rollback to a high aco, you'd keep all the job levels you gained as a high aco, but have to regain the ones as a 2-1 or 2-2 class.

Title: Re: rollback question
Post by: Volk on September 04, 2008, 09:39:25 pm

Yes. You'd have to rollback to High Novice.

Beat me to it.

Title: Re: rollback question
Post by: SoSmooth on September 04, 2008, 09:40:01 pm

You have to rollback to a High Novice
So if your HP base is 80 for example, you get a lvl 80/10 high novice.
Or you can change back to a 80/(job lvl you changed into HP)high  acolyte

Warning - while you were typing 2 new replies have been posted. You may wish to review your post.

:<

Title: Re: rollback question
Post by: novice on September 04, 2008, 09:41:10 pm

i become a lvl 90 high novice? then i can change class immediately?  ??? ???

Title: Re: rollback question
Post by: Volk on September 04, 2008, 09:42:59 pm

I think you have to get the 10 job lvls for High Novice. Then you would go to High Thief, get 40-50 job lvls (go for 50), then SinX.

Title: Re: rollback question
Post by: light aura on September 04, 2008, 09:44:03 pm

Quote from: novice on September 04, 2008, 09:41:10 pm

i become a lvl 90 high novice? then i can change class immediately?  ??? ???

Yeah.

You can change right away to a high thief, but you'd need to gain 40-50 job levels again.

Quote from: ichigochan1 on September 04, 2008, 09:42:59 pm

I think you have to get the 10 job lvls for High Novice. Then you would go to High Thief, get 40-50 job lvls (go for 50), then SinX.

You keep the job levels you gained as the class you rolled back to.

Although novice it really doesn't matter.

Title: Re: rollback question
Post by: novice on September 04, 2008, 09:44:36 pm

i will have to job lvl the new class im changing  ::)

Warning - while you were typing a new reply has been posted. You may wish to review your post

Title: Re: rollback question
Post by: Volk on September 04, 2008, 09:45:33 pm

Ah okay. And true, 10 job lvls is nothing.

And yes, you'd still have to get job lvls for your High Thief, since you went all the way back to High Novice.

Title: Re: rollback question
Post by: novice on September 04, 2008, 09:51:55 pm

my high acolyte changed to job 50, i have to job 50 again my high thief?

Title: Re: rollback question
Post by: SoSmooth on September 04, 2008, 09:54:46 pm

Basically, you just start over except that you keep your base level.

Title: Re: rollback question
Post by: light aura on September 04, 2008, 09:55:38 pm

Quote from: novice on September 04, 2008, 09:51:55 pm

my high acolyte changed to job 50, i have to job 50 again my high thief?

Yes.

BUT:

If you rolled back to a high aco instead of a high novice, you would keep your 50 job levels.


Understand?

Title: Re: rollback question
Post by: Volk on September 04, 2008, 09:55:58 pm

Yes. You can't rollback from HP to High Thief. You have to go High Novice first. Thus you have to regain those job levels again. But I found High Thief the easiest first trans class to job 50.