Old aRO Forums

The 'Other' Section => AnesisRO Archive => Archive => General Questions => Topic started by: DreamerP on April 17, 2008, 08:28:11 pm

Title: MirAI
Post by: DreamerP on April 17, 2008, 08:28:11 pm

I was using it yesterday and it was working fine and now today it's acting weird /sigh

I use /hoai and it says user AI which is the program so it works but when I use basic AI it doesn't go back to normal and it still acts on it's own like FBolting on it's own when it's suppose to be under my control again. I have no idea what's since it was working properly yesterday. Does anyone know what's going on?

Title: Re: MirAI
Post by: @schoLary@ on April 17, 2008, 08:29:34 pm

uhhh it sounds like you just activated your custom control for MirAi. Try /hoai again?

Title: Re: MirAI
Post by: Akishira on April 17, 2008, 08:42:59 pm

The 'basic' AI is RampageAI, which basically makes your homun go completely out of your control. Depending on the homun type it will become evasive (Armistr, Lif) or aggressive (Vanil, Filir) which explains the bolting.

To make your homun not attack things, you want the standby command: Alt-T, or rightclick the homun and select standby (the third option).

Title: Re: MirAI
Post by: DreamerP on April 17, 2008, 08:54:27 pm

I think I got now hmm seems like I had to relog to change between basic and user /ok weird but w/e it works now /no1 ty guys ^^

Title: Re: MirAI
Post by: DreamerP on April 17, 2008, 10:14:20 pm

/pif It's not potting the homunculus at least it starts to then it stops after a while and with there being pots still left /sigh what could've happened /sob

Title: Re: MirAI
Post by: Akishira on April 17, 2008, 10:16:05 pm

Sometimes it's lag, and sometimes it's just a bitch. Flywinging or otherwise zoning in/out usually fixes the no-potting problem.

Title: Re: MirAI
Post by: DreamerP on April 17, 2008, 10:53:07 pm

>_> so either way I can't go AFK is what your saying /sigh

Title: Re: MirAI
Post by: Akishira on April 17, 2008, 10:59:18 pm

Pretty much. You can run in windowed mode though, which is what I do- windowed homun training and windowed Photoshop together.

Title: Re: MirAI
Post by: nexusgen on April 18, 2008, 06:38:18 am

I have found that humunculus usually go out of the range of the pot pitch... so you will find your hum constantly dying due to this problem =\
And ya, for some reason it used to not work 100% for me either... Lag i guess and just ai going gay on you.

Oh and I think the humunculus that you have also determine some of the glitchy-ness... Vanil = very glitchy and sometimes they lag on spot and ai sometimes wont affect them, but amistr/lif have less of these problems... and so does filir.... vanil is the most bugged then filir, then amistr, then lif (dont know much bout lif)

Title: Re: MirAI
Post by: ayamei on July 25, 2008, 08:56:52 pm

Quote from: nexusgen on April 18, 2008, 06:38:18 am

I have found that humunculus usually go out of the range of the pot pitch... so you will find your hum constantly dying due to this problem =\

there is a box under the extra tab that lets you set how far away your homun can go from your alchy~

Title: Re: MirAI
Post by: Sera on July 26, 2008, 02:51:02 am

but also, if your homunn is takin damage (but I mean, red numbers rain :3) and the pitcher activates... it will stop usin it, although u still have pots. Its because the program "thinks" that the pot didnt exist since the homun didnt get healed... or something llike that. That maybe the problem?  (I really dont know, I read about this somewhere else... Dont remmember now xD, thats y i always run when my homun gets a mob :3)